replacement of fine aggregate by quarry dust

Experimental Study on Partial Replacement of Fine

Quarry Dust and red soil are replaced as fine aggregate in conventional concrete to achieve High strength 3 OBJECTIVES Replace the manufactured sand (quarry dust) and red soil with fine aggregate in ordinary Portland cement concrete Using quarry dust at various proportions like 8%, 12%, 16%, 20% in sand.

GGBS and Fine Aggregate with Quarry Dust Concrete by

Granulated Blast Furnace Slag (GGBS) and Fine Aggregate with Quarry Dust (QD) Ground Granulated Blast Furnace Slag is a by-product of Iron and Steel industry which is produced in large quantities as a solid waste It is highly cementitious, Quarry Dust is used as a replacement.

Study of Concrete Involving Use of Quarry dust as Partial

facing In this paper, the issues of environmental and economic concern are addressed by the use of quarry dust as partial replacement of fine aggregates in concrete Fine aggregates were replaced by quarry dust as 0%, 10%, 20%, 30% and 40% by weight for M-25 mix The concrete specimens were tested for compressive strength.

EFFECT OF QUARRY DUST AS PARTIAL REPLACEMENT OF SAND IN

The granulated plastic waste was used to partially replace fine aggregate (quarry dust) at 0, 5, 10, 15, and 20% and the concrete formed from the replacement was termed P0, P5, P10, P15 and P20.

EXPERIMENTAL STUDY ON CONCRETE IN PARTIALLY

dust as replacement of fine aggregate in concrete”, Asian journal of civil engineering [Building and housing] Vol8, No1, PP49-62 [2] Gurpreet Singh and Rafat siddique [2011] “Effect of waste of saw dust as partial replacement of sand on the strength, ultrasonic pulse velocity and.

Project Report On Fine Aggregate Replacement By Quarry Dust

Project Report On Fine Aggregate Replacement By Quarry Dust replacement sand quarry dust

REPLACEMENT OF FINE AGGREGATE WITH SAWDUST Abishek Narayanan1, Hemnath G 2, , y To compare the strength characteristics of normal concrete and concrete with Quarry dust and Saw dust Scope: 1) To provide an alternate light weight material , aggregate Fine aggregate Saw dust Max size mm 20 475 475 Specific gravity 269 262 027.

Quarry Dust Uses in a Construction Project

Jun 06, 2016· Quarry dust a by- product from crushing process during quarrying activities is good alternative during construction projects It is used as substitute to sand to make quarry dust concrete which is believed to be stronger and more durable than the regular concrete materials Uses of Quarry Dust It can be used as substitute to sand wholly or partly.

EXPERIMENTAL STUDY ON PARTIAL REPLACEMET OF FINE

concrete fine aggregate is partially replaced by quarry dust and saw dust The present investigation has been undertaken to study the effect of quarry dust and saw dust, by adding quarry dust of 10%, 20% and 30%, and saw dust of 10%, 15% and 20% with the fine aggregate, a matured fine aggregate.

Experimental study on replacement of fine aggregate in

212 Aggregat Fine aggregate used in this research is natural sand, manufactured sand, and quarry dust The physical property determined under IS 2386-2016 The angular shape coarse aggregate of size is 20 mm and below The physical properties of coarse aggregate determined under IS: 2386-1963 213 Water.

Project Report On Fine Aggregate Replacement By Quarry Dust

Project Report On Fine Aggregate Replacement By Quarry Dust replacement sand quarry dust

Research Paper EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH QUARRY DUST Venkata Sairam Kumar N 1, Dr B Panduranga Rao 2, Krishna Sai MLN 3 , quarry rock dust as fine aggregate in concrete construction National journal on.

Studies on Quarry Dust as Partial Replacement of Fine

to use Quarry dust to replace the fine aggregates in concrete Following are some of the conclusions drawn from the results of this investigation: 1 Quarry dust can be used as a finer material which can reduce the voids in concrete 2 Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory 3.

EXPERIMENTAL STUDY ON STRENGTH OF CONCRETE BY

Key words: Quarry dust, Compressive strength, Split tensile strength, Environmental Pollution Cite this Article: V Aishwaryalakshmi, Nilesh Kumar, MG Prathap, S Haribabu, Experimental Study on Strength of Concrete by Partial Replacement of Fine Aggregates with Quarry Dust International Journal of.

Quarry Dust Uses in a Construction Project

Jun 06, 2016· Quarry dust a by- product from crushing process during quarrying activities is good alternative during construction projects It is used as substitute to sand to make quarry dust concrete which is believed to be stronger and more durable than the regular concrete materials Uses of Quarry Dust It can be used as substitute to sand wholly or partly.

PALM KERNEL SHELL AS PARTIAL REPLACEMENT FOR FINE

partial replacement for fine aggregate in in asphaltic concrete up to 80% in Light, Medium and Heavy Traffic roads Palm kernel shell when used as a replacement in asphaltic concrete will reduce the littering of the environment by it and thus put it to a beneficial use.

Experimental Study on Partial Replacement of Fine

of granite fines to fine aggregate are 0, 10, 20, 30, 40, 50 and 100 for M20 mix proportions, specimens are tested after 28 days of curing, for compression strength, flexural and split tensile strength The specimen casted with 40 % replacement of granite fines to fine aggregate gives higher strength when compared to control specimen.

EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF

Similarly the percentage of quarry dust added by weight was 0, 15%, 20% and 25%, respectively the fine aggregate replacement in concrete From this experimental results it is observed that replacing coarse aggregate with 15% of Bamboo and fine aggregate by15 % of Quarry dust gave a satisfactory result when compared with conventional.

EXPERIMENTAL STUDY ON PARTIAL REPLACEMET OF FINE

concrete fine aggregate is partially replaced by quarry dust and saw dust The present investigation has been undertaken to study the effect of quarry dust and saw dust, by adding quarry dust of 10%, 20% and 30%, and saw dust of 10%, 15% and 20% with the fine aggregate, a matured fine aggregate.

Effect of Partial Replacement of Fine Aggregate with

So, it is time to find an alternative material for natural sand In order to fulfill the requirement of fine aggregates work, an alternative material like manufactured sand and quarry dust can be used in concrete Manufactured sand is defined as a purpose-made crushed fine aggregate produced from a suitable source material.

Experimental Study on Partial Replacement of Fine

Quarry Dust and red soil are replaced as fine aggregate in conventional concrete to achieve High strength 3 OBJECTIVES Replace the manufactured sand (quarry dust) and red soil with fine aggregate in ordinary Portland cement concrete Using quarry dust at various proportions like 8%, 12%, 16%, 20% in sand.

An Experimental Study on Partial Replacement of Fine

replace fine aggregate in concrete by an alternate material also to some extent or totally without compromising the quality of concrete Quarry dust has been used for different activities in the construction industry, such as building materials, road development materials, aggregates, bricks, and til Quarry Dust.

STUDY OF PARTIAL REPLACEMENT OF FINE AGGREGATE BY

of quarry dust up to 0% replacement of fine aggrega te From 10% there is a decrease in split tensile strength 3 The compressive strength increase mainly depends on the percentage of quarry dust because of its high p ozzolanic nature 4 The workability of the concrete increase as the percentage of quarry dust is increased 5.